Saturday, October 7, 2017

Home Office Lighting Tips from an Electrician

Raising productivity through lighting

My Home Office III

Lighting can influence productivity in any office situation, even the home office. (Photo Credits)

Ever wonder why offices have bright lights that almost simulate daylight? That is because lighting helps spark productivity. And for those that work from home, a great home office set-up would help a lot in increasing the productivity needed for that extra push to earn and learn. American Lighting Association

Decoist.com came up with advice on how to keep lighting functional and at the same time classy for any home office.  It emphasized that there is a benefit to mixing natural and artificial lighting, in any home office environment.

"One of the things you notice about some techno-addicts who are hooked onto their laptops, iPads and smartphones is the way they deliberately avoid any hint of natural sunlight. If you did not know better, you would be tempted to believe that these folks are long-lost cousins of Count Dracula! But in reality, natural light is not such a bad thing if you know how to use it in the right fashion. Yes, glossy surfaces can be a problem at times, but try and usher in natural light in a controlled fashion and ensure that in blends in beautifully with artificial illumination."

Electrical Wiring Tips from an Electrician

Check out their whole gallery of home offices here.

More lighting tips for home offices

Apartment Therapy meantime came up with suggestions on improving home lighting, even for those who are just leasing their homes. Ambient lighting is one of their proposed solutions. Master Electrician 

"Ambient light is a great stress reliever. It's pretty lame to look up from a long day of work and realize you're sitting alone with only the light of your desk lamp for company. Ambient light fills the area with a soothing glow, for a warmer, more comfortable atmosphere."

Electrician's Advice on Safety during Inclement weather

Read the continuation here.

Related Electrical Repair and Installation Services:

The Spruce also came up with tips on having great lighting in the home office. One of the items discussed in their lengthy post was decorative lighting. "As mentioned, most home offices will feature ambient lighting that is diffused throughout the space and task lighting that is focused on specific workstations. Beyond these two functional lighting types, you may want to add decorative and accent lighting to help improve the visual character of your home office. Accent lighting like mantel or picture lights draws attention to objects or other elements in the room, while decorative lights—such as wall sconces—provide direct visual appeal."

Check out the rest of the suggestions here.

Consulting a licensed electrician contractor can help in ensuring great lighting and better productivity in any home office.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrician in San Diego CA

Electrician's Advice on Installing Garden Lights

The post Home Office Lighting Tips from an Electrician appeared first on GforceElectric.

Home Office Lighting Tips from an Electrician

Raising productivity through lighting

My Home Office III

Lighting can influence productivity in any office situation, even the home office. (Photo Credits)

Ever wonder why offices have bright lights that almost simulate daylight? That is because lighting helps spark productivity. And for those that work from home, a great home office set-up would help a lot in increasing the productivity needed for that extra push to earn and learn. American Lighting Association

Decoist.com came up with advice on how to keep lighting functional and at the same time classy for any home office.  It emphasized that there is a benefit to mixing natural and artificial lighting, in any home office environment.

“One of the things you notice about some techno-addicts who are hooked onto their laptops, iPads and smartphones is the way they deliberately avoid any hint of natural sunlight. If you did not know better, you would be tempted to believe that these folks are long-lost cousins of Count Dracula! But in reality, natural light is not such a bad thing if you know how to use it in the right fashion. Yes, glossy surfaces can be a problem at times, but try and usher in natural light in a controlled fashion and ensure that in blends in beautifully with artificial illumination.”

Electrical Wiring Tips from an Electrician

Check out their whole gallery of home offices here.

More lighting tips for home offices

Apartment Therapy meantime came up with suggestions on improving home lighting, even for those who are just leasing their homes. Ambient lighting is one of their proposed solutions. Master Electrician 

“Ambient light is a great stress reliever. It’s pretty lame to look up from a long day of work and realize you’re sitting alone with only the light of your desk lamp for company. Ambient light fills the area with a soothing glow, for a warmer, more comfortable atmosphere.”

Electrician’s Advice on Safety during Inclement weather

Read the continuation here.

Related Electrical Repair and Installation Services:

The Spruce also came up with tips on having great lighting in the home office. One of the items discussed in their lengthy post was decorative lighting. “As mentioned, most home offices will feature ambient lighting that is diffused throughout the space and task lighting that is focused on specific workstations. Beyond these two functional lighting types, you may want to add decorative and accent lighting to help improve the visual character of your home office. Accent lighting like mantel or picture lights draws attention to objects or other elements in the room, while decorative lights—such as wall sconces—provide direct visual appeal.”

Check out the rest of the suggestions here.

Consulting a licensed electrician contractor can help in ensuring great lighting and better productivity in any home office.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrician in San Diego CA

Electrician’s Advice on Installing Garden Lights

The post Home Office Lighting Tips from an Electrician appeared first on GforceElectric.



This first appeared on Linda Song's Tumblr

Monday, October 2, 2017

Electrician’s Advice on Installing Garden Lights

All about landscape Lighting

Blaze Of Glory - Syon House & Park, The Great Conservatory - London

Installing landscape lights can make a whole lot of difference in the aesthetics of a home. (Photo Credits)

Garden lights can accentuate any outdoor landscape for any home. And it definitely makes a whole lot of difference in terms of highlighting the vibrancy and beauty of the garden and the lawn during night time. Build Safe 

For those who may want to try their hand in installing outdoor or landscaping lights, Popular Mechanics came up with tips on how to install these fixtures.

“Start by laying the light fixtures on the ground where you intend to install them. Space the fixtures 8 to 10 feet apart. Next, unroll the spool of low-voltage electrical cable and lay the cable beside the fixtures. If you come to an obstacle, such as a boulder, tree, or fence, string the cable under or around it.”

Read the rest of the tips here.

Plan the project

The Family Handyman also came up with its own comprehensive guide on installing outdoor, garden, and landscape lights. Electrician

“For this project, you should have the fundamental wiring skills it takes to make proper connections and the basic electrical and carpentry tools. While they’re not crucial, a trench shovel, a mattock and a sledgehammer (Photos 1 and 2) will make the trench work easier and faster. Allow about a day to complete this project, assuming you collect all the parts in advance.”

Different Types of Electrical Cords of an Electrician

Check out the whole comprehensive guide here.

Related Electrical Installation and Repair Services:

DIY.com also published its share of tips on self-installation of outdoor lights. It however emphasized that safety precautions should always be observed especially when doing DIY jobs concerning electricity.

Electrician’s Tips for Pet Safety

“Never take risks with electrical safety. Before you start any type of electrical work, you must follow these following safety precautions: (1) Switch off the main power at the consumer unit/fuse box. Isolate the circuit you plan to work on by removing the circuit fuse. Put this in your pocket to avoid accidental replacement. (2) Or switch off the breaker and lock it if you can. (3) Attach a note to the unit to advise you are working on the circuit. (4) Check the circuit is dead with a socket tester or voltage tester/meter for lighting circuits.”

See the rest of the guide here.

To ensure safe and efficient outdoor lighting installation, it will always be a great move to consult with a licensed electrician contractor.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrician in San Diego CA

Electrician’s tips in installing Holiday Lights

The post Electrician’s Advice on Installing Garden Lights appeared first on GforceElectric.



This first appeared on Linda Song's Tumblr

Electrician’s Advice on Installing Garden Lights

All about landscape Lighting

Blaze Of Glory - Syon House & Park, The Great Conservatory - London

Installing landscape lights can make a whole lot of difference in the aesthetics of a home. (Photo Credits)

Garden lights can accentuate any outdoor landscape for any home. And it definitely makes a whole lot of difference in terms of highlighting the vibrancy and beauty of the garden and the lawn during night time. Build Safe 

For those who may want to try their hand in installing outdoor or landscaping lights, Popular Mechanics came up with tips on how to install these fixtures.

"Start by laying the light fixtures on the ground where you intend to install them. Space the fixtures 8 to 10 feet apart. Next, unroll the spool of low-voltage electrical cable and lay the cable beside the fixtures. If you come to an obstacle, such as a boulder, tree, or fence, string the cable under or around it."

Read the rest of the tips here.

Plan the project

The Family Handyman also came up with its own comprehensive guide on installing outdoor, garden, and landscape lights. Electrician

"For this project, you should have the fundamental wiring skills it takes to make proper connections and the basic electrical and carpentry tools. While they're not crucial, a trench shovel, a mattock and a sledgehammer (Photos 1 and 2) will make the trench work easier and faster. Allow about a day to complete this project, assuming you collect all the parts in advance."

Different Types of Electrical Cords of an Electrician

Check out the whole comprehensive guide here.

Related Electrical Installation and Repair Services:

DIY.com also published its share of tips on self-installation of outdoor lights. It however emphasized that safety precautions should always be observed especially when doing DIY jobs concerning electricity.

Electrician's Tips for Pet Safety

"Never take risks with electrical safety. Before you start any type of electrical work, you must follow these following safety precautions: (1) Switch off the main power at the consumer unit/fuse box. Isolate the circuit you plan to work on by removing the circuit fuse. Put this in your pocket to avoid accidental replacement. (2) Or switch off the breaker and lock it if you can. (3) Attach a note to the unit to advise you are working on the circuit. (4) Check the circuit is dead with a socket tester or voltage tester/meter for lighting circuits."

See the rest of the guide here.

To ensure safe and efficient outdoor lighting installation, it will always be a great move to consult with a licensed electrician contractor.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrician in San Diego CA

Electrician's tips in installing Holiday Lights

The post Electrician's Advice on Installing Garden Lights appeared first on GforceElectric.

Friday, September 22, 2017

Electrician’s tips in installing Holiday Lights

Safe installation of Christmas Lights

Xmas Lights

Holiday lights have always been a tradition to most households. However it could be a source of accidents and untoward incidents like home fires and strangulation.

Safe installation is important to ensure that the safety of every home occupant will not be threatened.

In its official website, DIYNetwork.com shared the advice of their resident electrician on ensuring safe holiday light installation, and it all begins with using safe tools and equipment like the ladder. American Lighting Association                 

"Use a good ladder when installing your lights. Secure them with insulated holders (never use tacks or nails). Don't install your lights on trees that come in contact with power lines. Before installing your Christmas lights, plug them in to make sure all of your bulbs are working. Make sure to turn your lights off when you leave or go to bed at night."

Electrician's Guide in Choosing Appliances

Check out the rest of the advice here.

Exterior Holiday Lights

True Value also published a comprehensive guide on installing Christmas lights safely. It highlighted both the safety measures that should be observed when using Christmas lights in and out of the home. Master Electrician                

"Make sure you stay clear of power lines when you install holiday lights. If connecting to an inside power source, keep the window or door open slightly so the cord does not get crushed. Inside, when adding lights to your Christmas tree, for example, work from the inside, close to the tree trunk out towards the tips of the branches. When you reach the tip of a branch, wrap your way back toward the trunk."

Read more here.

Related Electrical Repair and Installation Services:

Popular Mechanics meantime emphasized that careful planning will help in the safe installation of Holiday lights both inside and outside the home.

"Before you start, make a plan. Measure the locations where you will string lights. Most likely this will be along eaves or gutters and around windows. Use this plan to estimate how many strands you'll need and how long they should be. Unfortunately, there are no standard strand lengths, but there are standard-size bulbs and standard distances between bulbs on a strand. Look for C7- or C9-size bulbs spaced 6 to 8 inches apart. A longer distance between bulbs allows for more light to spread across a wider area, creating more picturesque shadows and greater warmth."

Check out the rest of the safe installation tips here.

Electrician's Advice on Safety for Older Homeowners

Check out the rest of the advice here.

Safe installation of Holiday Lights is important to ensure that the whole holiday season will remain safe and accident-free.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrical Repair San Diego

Electricians answer: When to install additional lights at home

The post Electrician's tips in installing Holiday Lights appeared first on GforceElectric.

Electrician’s tips in installing Holiday Lights

Safe installation of Christmas Lights

Xmas Lights

Holiday lights have always been a tradition to most households. However it could be a source of accidents and untoward incidents like home fires and strangulation.

Safe installation is important to ensure that the safety of every home occupant will not be threatened.

In its official website, DIYNetwork.com shared the advice of their resident electrician on ensuring safe holiday light installation, and it all begins with using safe tools and equipment like the ladder. American Lighting Association                 

“Use a good ladder when installing your lights. Secure them with insulated holders (never use tacks or nails). Don’t install your lights on trees that come in contact with power lines. Before installing your Christmas lights, plug them in to make sure all of your bulbs are working. Make sure to turn your lights off when you leave or go to bed at night.”

Electrician’s Guide in Choosing Appliances

Check out the rest of the advice here.

Exterior Holiday Lights

True Value also published a comprehensive guide on installing Christmas lights safely. It highlighted both the safety measures that should be observed when using Christmas lights in and out of the home. Master Electrician                

Make sure you stay clear of power lines when you install holiday lights. If connecting to an inside power source, keep the window or door open slightly so the cord does not get crushed. Inside, when adding lights to your Christmas tree, for example, work from the inside, close to the tree trunk out towards the tips of the branches. When you reach the tip of a branch, wrap your way back toward the trunk.”

Read more here.

Related Electrical Repair and Installation Services:

Popular Mechanics meantime emphasized that careful planning will help in the safe installation of Holiday lights both inside and outside the home.

“Before you start, make a plan. Measure the locations where you will string lights. Most likely this will be along eaves or gutters and around windows. Use this plan to estimate how many strands you’ll need and how long they should be. Unfortunately, there are no standard strand lengths, but there are standard-size bulbs and standard distances between bulbs on a strand. Look for C7- or C9-size bulbs spaced 6 to 8 inches apart. A longer distance between bulbs allows for more light to spread across a wider area, creating more picturesque shadows and greater warmth.”

Check out the rest of the safe installation tips here.

Electrician’s Advice on Safety for Older Homeowners

Check out the rest of the advice here.

Safe installation of Holiday Lights is important to ensure that the whole holiday season will remain safe and accident-free.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrical Repair San Diego

Electricians answer: When to install additional lights at home

The post Electrician’s tips in installing Holiday Lights appeared first on GforceElectric.



This first appeared on Linda Song's Tumblr

Sunday, September 17, 2017

Electricians answer: When to install additional lights at home

Installing lighting fixtures

Light fixture

Installation can be a breeze when hiring the services of an electrician. (Photo Credits)

Some homeowners later discover that they need more lights for their home. Maybe in one area, maybe in every room. Whatever the case may be, a call to a local expert and licensed electrician will solve this issue. Builders and Contractors

For homeowners though who may just want to install new lighting fixtures, and already have the wiring for that, there are a lot of self-help tips available.

Hometips.com for instance published guidelines on how to install lighting fixtures.

“Fixtures come in different weights and sizes, and these features determine the mounting method. Lightweight, small ceiling fixtures can generally be screwed directly into the fixture box’s mounting ears. However, heavier fixtures may need to be fastened to the box with a mounting bar, hickey, or stud. Fixtures weighing more than 50 pounds will need to be secured to a joist or beam as well as to the mounting box.”

Read more here.

Working with lights

Home and Garden Television, also has in its official website, a guide on how to install different lighting fixtures. Electricians

Electrician’s Advice on Safety for Older Homeowners

“When working with electrical connections, normally the black wire is hot, the white is neutral and the bare is ground. If the wires are the same color or other colors, testing is needed. Test the wires by touching one end of the circuit tester to one of the wires connecting to the light and the other end to the ground. The hot wire is the one that causes the circuit tester to light up. Turn the power off at the breaker and label the hot wire with black electrical tape for future reference.”

Check out the step-by-step instructions here.

Related Electrical Repair and Installation Services:

The Family Handyman also shared some useful tips in installing lighting fixtures in and around the house.

Electrician’s Tips for Pet Safety

“Not all electrical boxes with a light switch in them contain the necessary ground, hot and neutral conductors. To find out, first shut off the power to the switch at the main electrical panel. Then remove the switch cover, and hold the non-contact voltage detector against the wires attached to the switch. This is to ensure the power is off before you remove the screws and pull the switch from the box.”

See the whole guide here.

When unsure as to how to go about installing additional lighting fixtures calling up an expert electrical contractor always solves this issue.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electrical Contractor San Diego

Electrician’s Advice on Safety during Inclement weather

The post Electricians answer: When to install additional lights at home appeared first on GforceElectric.



This first appeared on Linda Song's Tumblr